Use a drill and drill bit to drill a hole into the top of the wood ball knob.
Twist a screw eye into the drilled hole. This is the top of the head.
Use craft glue and attach the flat bottom side of the ball knob onto the cork to make a body and head. Let set upright until dry.
Cut a piece of pipe cleaner about 4″ in length. Wrap it around the cork to create a circle shape, overlapping the ends.
Twist the ends together to create a crown. Attach the crown to the back of the head with hot glue. Set aside.
Make the wings out of the sheet music. Trim the white edges off the pages of sheet music with a paper trimmer and discard.
Use the paper trimmer (or a pair of scissors) to cut out 3″ x 4″ pieces of paper. Each of these rectangles is needed for each angel.
Fold the angel wings along the short, 3″ side about 1/4″ into a zig zag/fan pattern.
Add a “zip” of hot glue onto the center of the according wings as shown. Press firmly together.
Repeat on the other side, in the center to hold it into a bow like shape. Use hot glue to affix the wings to the back of the cork.
Cut a piece of jute twine and knot it. Tie it into a slip knot on the screw eye to hang on your tree.